Western Wire Cat6 Structured Cabling Guide: Cable, Patch Cords, Keystone Jacks and Patch Panels
Meet the Western Wire Cat6 family: indoor LSZH data cable, LS0H patch cords, the tool-less WC500 keystone jack and the WE724 24-port panel, one matched channel from cabinet to desk.
A network performs only as well as its weakest link: the channel running from the cable, to the outlet, to the patch panel and on to the switch. The Western Wire Cat6 family is designed so that every part of that channel is filled with products that match. This guide covers the Western Wire Cat6 data cable, patch cords, keystone jack and patch panel, where each one is used, and what to check when ordering.
What is Western Wire?
Western Wire is a brand of copper networking products for indoor structured cabling. Its Cat6 range consists of horizontal data cable, factory-made patch cords, a tool-less keystone jack and a blank keystone patch panel. The products are built to work together: the WC500 keystone jack fits the WE724 patch panel, and the patch cords connect that panel to active equipment.
The Western Wire Cat6 product family
1. Western Wire Cat6 U/UTP LSZH indoor data cable
The Western Wire Cat6 U/UTP LSZH data cable is a 250 MHz, four-pair unshielded copper cable for horizontal cabling.
- Conductor: Solid annealed bare copper
- Construction: 4 pairs with a star-shaped pair separator
- Jacket: LSZH (low smoke, zero halogen), indoor
- Colour: White RAL 9003
- Outer diameter: 5.5 ± 0.2 mm
- Operating temperature: −20 to +60 °C
- Part numbers: WA5AA (500 m drum), WA5AB (305 m drum)
2. Western Wire Cat6 U/UTP LS0H patch cord
The Western Wire Cat6 patch cord has unshielded RJ45 plugs on both ends and connects patch panels to switches, or wall outlets to PCs, IP phones, printers and access points.
- Conductor: 26 AWG, 7 × 0.16 mm stranded bare copper
- Jacket: LS0H, indoor
- Colour: Light grey RAL 7035; other colours on request
- Lengths and part numbers: WD005 0.5 m · WD010 1 m · WD020 2 m · WD030 3 m · WD050 5 m · WD070 7 m · WD0A0 10 m
3. Western Wire WC500 Cat6 UTP tool-less keystone jack
The Western Wire WC500 keystone jack is an RJ45 (8P8C) termination point for wall outlets, patch panels and surface-mount boxes.
- Tool-less termination: No punch-down tool required
- 110 IDC blocks with universal T568A/B colour coding
- Conductor range: 22–26 AWG solid, 24–26 AWG stranded
- Housing: Impact-resistant polycarbonate, UL 94 V-2
- Operating conditions: 0 to +70 °C, 0–90 % RH non-condensing
4. Western Wire WE724 24-port blank keystone patch panel
The Western Wire WE724 patch panel is a 19-inch 1U, 24-port blank keystone panel with a fixed rear cable organiser. Jacks are not included; the WC500 is the recommended match.
Building an end-to-end Western Wire Cat6 channel
- Run Western Wire Cat6 U/UTP LSZH cable from the WE724 panel to each user outlet.
- Terminate both ends with WC500 tool-less keystone jacks.
- Connect the panel to the switch with short Western Wire Cat6 patch cords.
- Connect the outlet to the end device with a patch cord of suitable length.
- Label and test every link with a cable certifier.
Keep the same category (Cat6) and shielding type (U/UTP) across the whole channel; mixing them drags performance down to the weakest component.
Frequently asked questions
What speeds does Western Wire Cat6 cable support?
Cat6 U/UTP cable with 250 MHz bandwidth is designed for 1 Gbit/s Ethernet up to 100 metres; 10 Gbit/s can be supported over shorter distances depending on installation conditions.
What do LSZH and LS0H mean?
Both mean Low Smoke Zero Halogen: a jacket that releases less smoke and no halogen gases in a fire, preferred in enclosed, occupied buildings.
Do I need a tool for the WC500 keystone jack?
No. The WC500 is tool-less: place the wires by the colour code and close the cap.
Are jacks included with the WE724 patch panel?
No. The WE724 is a blank panel; order WC500 jacks separately.
Quotes and technical support
Send your bill of quantities with lengths, port counts and part numbers through the quote form, and our team will confirm the right combination of cable, jacks, panels and patch cords.